500mm Basket Glasswashers

Rack size 500 x 500mm
Cycles: 120, 180, 240 and 480 seconds
Racks output p/h 20 & 30
Single wall construction
Self cleaning
Rinse aid dispenser and detergent pump
Wash pump: 450 W
Tank capacity: 21 litres
Water consumption: 2 litres per cycle
Electrical loading: 3.7kW single or three phase
600mm x 605mm x 820mm
One year parts and labour warranty

Image shows 400mm basket model

Accurate detergent & rinse aid peristaltic dosing pumps with dosing setup by fascia controls
Easy clean parallel wash and rinse arm assembly
Single skinned body with double skinned door
Drain pump version available
Supplied with two open cup/glass racks & cutlery insert as standard
Basket size: 500mmx500mm
Maximum useable height: 340mm
Door opening: 365mm
Cycle times: 90/180 seconds
Water consumption per cycle 2.5 Litres
Wash tank capacity: 20 Litres
Electrical loading: 2.6kW / 4.5 / 6.5kW 230V~
580mm x 610mm x 810mm
One year parts and labour warranty

Feet will add 10-20mm in overall height

Please note the drainage on this model is gravity fed, you will need a low level drain, or to position the unit on a stand so that the drain connection is below the bottom the tank. Alternatively select the optional drain pump below.

Guaranteed disinfection through standard DIN 10534 with thermal lock function ensuring the rinsing is carried out at the ideal temperature to disinfect the dishes

304 grade stainless steel construction
Peristaltic detergent pump
Interior with rounded corners to reduce dirt build up
Double walled door, safety microswitch and high quality door seal, perfectly soundproof and watertight
Fixed dedicated cycles
IP65 rated control panel with temperature ready light
Tool free removal of diffusers and filters for easy cleaning
Upper and lower wash arms

Basket size: 500mm x 500mm
Door clearance: 240mm
Maximum glass height: 240mm
Cycle options: 90 / 120 seconds
Weight: 41kg
Pump power: 0.33Hp / 250W
Tank loading: 1.2kW
Boiler loading: 2.5kW
Total loading: 2.750kW 12A 230V~
470mm x 535mm x 670mm
One years parts and labour warranty

Optional Pro-Active drain pump option available below with water tank renovation system - replenishes the water in the wash tank during the rinse cycle keeping the wash tank cleaner for longer and extending the required time between full drain down of the tank

This unit must be connected to a pre-softened water supply to prevent damage to the machine which will invalidate the warranty. Optional external water filter available below

The AX active range from Sammic has been developed with the aim of making the latest washing technologies available to professionals, without the hassle

Simple and user-friendly control
Intuitive feedback using icons
Dedicated cycles; selection of the ideal wash programme using icons. The duration of the cycle is adapted according to the type of item to be washed
Electronic control panel with IP65 humidity protection

Guaranteed disinfection in compliance with standard DIN 10534
Thermal lock function ensuring the rinsing will be carried out at the ideal temperature to disinfect the dishes
Ergonomic design with rounded corners to easy cleaning
Embedded basket guides
Compact tank volume saves water and energy
Integrated easy grip door handle recessed into body of machine for increased hygiene and an attractive appearence

Hydroblade washing arms, durable and resistant to impacts
Three stage filter system keeps washing water in optimal condition, quickly removable without disconnection the wash arms
Double-walled door and high quality door seal
38cm load capacity ideal for tall glasses and small plates
Surface filters with easy-on design

Supplied with: one glasses basket, one mixed basket & one small cutlery basket
Peristaltic detergent pump included
Basket size: 500mm x 500mm
Maximum glass height: 380mm
Number of cycle options: 3
Cycle durations: 120/150/210 seconds
Basket output per hour: 30/24.17
Pump power: 0.75Hp / 500W
Tank power: 1.8kW
Boiler power: 2.5kW
Net weight: 55kg
Electrical loading: 3kW 12A 230V~
580mm x 635mm x 835mm
Two years parts and labour warranty

Optional Pro-Active drain pump option available below with water tank renovation system - replenishes the water in the wash tank during the rinse cycle keeping the wash tank cleaner for longer and extending the required time between full drain down of the tank

Double rack kit available below - Wash glassware up to 110mm high with the lower wash arms and plates up to 230mm diameter with the upper wash arms simultaniously. With no installation required you can work with or without the kit as required

This unit must be connected to a pre-softened water supply to prevent damage to the machine which will invalidate the warranty. Optional external water filter available below

Internal breaktank as standard
Accurate detergent & rinse aid peristaltic dosing pumps with dosing setup by fascia controls
Easy clean parallel wash and rinse arm assembly
Single skinned body with double skinned door
Drain pump version available
Supplied with one open cup/glass rack, one pegged plate racks & cutlery insert as standard
Basket size: 500mmx500mm
Maximum useable height: 340mm
Door opening: 365mm
Cycle times: 90/180 seconds
Water consumption per cycle 2.5 Litres
Wash tank capacity: 20 Litres
Electrical loading: 2.6kW / 4.5 / 6.5kW 230V~
580mm x 610mm x 810mm
One year parts and labour warranty

Feet will add 10-20mm in overall height

Please note the drainage on this model is gravity fed, you will need a low level drain, or to position the unit on a stand so that the drain connection is below the bottom the tank. Alternatively select the optional drain pump below.

Four button bright LED display with soft touch controls, twin traffic lights giving instant status updates & operational self-diagnostics
Alarms menu with hi-level information retrieval
Improved wash action from quick release parallel wash & rinse arm design
Surface scrap tray filters supplied as standard
Fitted drain pump version available - drain pump cannot be retro fitted
Three standard cycle time options with further options available
Cycle times can be tailored to site requirements
Automatic self-cleaning at end of service
Selectable energy saving mode
Selectable thermostop ensures optimum rinse temperatures
Patented dual flow wash pump - reducing power consumption whilst retaining wash efficiency
Moulded wash tank for easy cleaning
Moulded rack guide giving partial double skin
Accurate detergent and rinse aid peristaltic dosing pumps as standard
Supplied with two open cup/glass racks & cutlery insert
Basket size: 500mm x 500mm
Maximum useable height: 340mm
Cycle times: 70 / 90 / 180 seconds
Water consumption per cycle: 2 litres
Tank capacity: 20 litres
Electrical loading: 2.6kW / 4.5kW / 6.5kW 230V~
580mm x 610mm x 810mm
Two years parts and labour warranty

Height excludes feet which add 10-20mm

Three phase option available - please contact us for information

If 13A unit is ordered it will be supplied with original cable without a plug. Standard 13A plug is not suitable for the cable supplied. If using a 13A plug a replacement cable will be required on installation. Units on a 13amp supply will not be capable of running repeated cycles and the duration of the cycle will be automatically extended to allow the correct operating temperature. We strongly recommend using a blended hot supply (no higher than 55°C) in these circumstances

Internal breaktank as standard
Internal drain pump as standard
Internal automatic water softener as standard
Three button bright LED display with soft touch controls and alarms menu
Accurate detergent & rinse aid peristaltic dosing pumps with dosing setup by fascia controls
Easy clean parallel wash and rinse arm assembly
Single skinned body with double skinned door
Supplied with one open cup/glass rack, one pegged plate racks & cutlery insert as standard
Basket size: 500mmx500mm
Maximum useable height: 340mm
Door opening: 365mm
Cycle times: 90/180 seconds
Water consumption per cycle 2.5 Litres
Wash tank capacity: 20 Litres
Electrical loading: 2.6kW / 4.5 / 6.5kW 230V~
580mm x 610mm x 810mm
One year parts and labour warranty

Feet will add 10-20mm in overall height

Internal automatic water softener & drain pump model
WRAS approved break tank
Four button bright LED display with soft touch controls, twin traffic lights giving instant status updates & operational self-diagnostics
Alarms menu with hi-level information retrieval
Improved wash action from quick release parallel wash & rinse arm design
Improved range of water hardness settings
Automatic continuous internal water softener and drain pump as standard
Supplied with breaktank as standard
Three standard cycle time options with further options available
Cycle times can be tailored to site requirements
Reduced water consumption
Automatic self-cleaning at end of service
Selectable energy saving mode
Selectable thermostop ensures optimum rinse temperatures
Patented dual flow wash pump - reducing power consumption whilst retaining wash efficiency
Moulded wash tank for easy cleaning
Moulded rack guide giving partial double skin
Surface scrap tray filters supplied as standard
Accurate detergent and rinse aid peristaltic dosing pumps as standard
Supplied with one pegged rack, one open cup/glass rack & cutlery insert
Partial double skin for noise and heat loss reduction
Cycle times: 70, 90, 180 seconds
Rack size: 500mm x 500mm
Usable height: 340mm
Water consumption per cycle:2 litres
Tank capacity: 20 litres
Electrical loading: 2.6kW /r 4.5kW / 6.5kW 230V~
580mm x 610mm x 810mm (height excludes feet at 10 - 20mm)
Two years parts and labour warranty

If 13A unit is ordered it will be supplied with original cable without a plug. Standard 13A plug is not suitable for the cable supplied. If using a 13A plug a replacement cable will be required on installation. Units on a 13amp supply will not be capable of running repeated cycles and the duration of the cycle will be automatically extended to allow the correct operating temperature. We strongly recommend using a blended hot supply (no higher than 55°C) in these circumstances

Integral drain pump
Four button bright LED display with soft touch controls, twin traffic lights giving instant status updates & operational self-diagnostics
Alarms menu with hi-level information retrieval
Improved wash action from quick release parallel wash & rinse arm design
Improved triple wash tank filtration
Three standard cycle time options with further options available
Cycle times can be tailored to site requirements
Reduced water consumption
Comprehensive automatic self-cleaning at end of service
Selectable energy saving mode
Selectable thermostop ensures optimum rinse temperatures
Fully double skinned minimising both acoustic output and reduced heat loss
Patented dual flow wash pump with soft start - reducing power consumption whilst retaining wash efficiency
Full door seal and door ajar facility
Moulded wash tank for easy cleaning
Moulded rack guide
Surface scrap tray filters supplied as standard
Accurate detergent and rinse aid peristaltic dosing pumps as standard
Supplied with two open cup/glass racks & cutlery insert
Rack size: 500mm x 500mm
Useable height: 260mm
Water consumption per cycle: 2 litres
Tank capacity: 15 litres
Electrical loading: 2.6kW / 4.5kW / 6.5kW 230V~ or 6kW 400V 3N~
600mm x 600mm x 710mm (height excludes feet which add 10 - 20mm)
Two years parts and labour warranty

If 13A unit is ordered it will be supplied with original cable without a plug. Standard 13A plug is not suitable for the cable supplied. If using a 13A plug a replacement cable will be required on installation. Units on a 13amp supply will not be capable of running repeated cycles and the duration of the cycle will be automatically extended to allow the correct operating temperature. We strongly recommend using a blended hot supply (no higher than 55°C) in these circumstances

WRAS break tank fitted
Integral drain pump fitted
Polychromatic LCD display and user interface giving uncomplicated machine status updates
Improved wash action from quick release parallel wash & rinse arm design
Stainless steel scrap tray filters supplied as standard
Improved triple wash tank filtration
Four button control fascia with special programmes button, operational self-diagnostics & alarms menu
Drain pump & breaktank supplied as standard
Three standard cycle options with an extensive range of special cycles
Cycle times can be tailored to site requirements
Reduced water consumption
Comprehensive automatic self cleaning at end of service
Selectable energy saving mode
Selectable thermostop ensures optimum rinse temperatures
Fully double skinned minimising both acoustic output and reduced heat loss
Patented dual flow wash pump with soft start - reducing power consumption whilst retaining wash efficiency
Full door seal & door ajar facility
Moulded wash tank for easy cleaning
Moulded rack guide
Accurate detergent and rinse aid peristaltic dosing pumps as standard
Priming and dosing of chemicals enabled from fascia controls
Supplied with two open cup/glass racks & cutlery insert
Basket size: 500mm x 500mm
Maximum useable height 265mm
Cycle times: 90 / 120 / 150 seconds
Water consumption per cycle: 1.8 litres
Tank capacity: 15 litres
Electrical loading:2.6kW / 4.5kW / 6.5kW 230V~ or 6.5kW 400V 3N~ (special order)
600mm x 600mm x 710mm (720mm-730mm inc feet)
Two years parts and labour warranty

If 13A unit is ordered it will be supplied with original cable without a plug. Standard 13A plug is not suitable for the cable supplied. If using a 13A plug a replacement cable will be required on installation. Units on a 13amp supply will not be capable of running repeated cycles and the duration of the cycle will be automatically extended to allow the correct operating temperature. We strongly recommend using a blended hot supply (no higher than 55°C) in these circumstances

Integral automatic water softener model
WRAS break tank fitted
Integral drain pump fitted
Polychromatic LCD display and user interface giving uncomplicated machine status updates
Improved wash action from quick release parallel wash & rinse arm design
Stainless steel scrap tray filters supplied as standard
Improved triple wash tank filtration
Four button control fascia with special programmes button, operational self-diagnostics & alarms menu
Drain pump & breaktank supplied as standard
Three standard cycle options with an extensive range of special cycles
Cycle times can be tailored to site requirements
Reduced water consumption
Comprehensive automatic self cleaning at end of service
Selectable energy saving mode
Selectable thermostop ensures optimum rinse temperatures
Fully double skinned minimising both acoustic output and reduced heat loss
Patented dual flow wash pump with soft start - reducing power consumption whilst retaining wash efficiency
Full door seal & door ajar facility
Moulded wash tank for easy cleaning
Moulded rack guide
Accurate detergent and rinse aid peristaltic dosing pumps as standard
Priming and dosing of chemicals enabled from fascia controls
Supplied with two open cup/glass racks & cutlery insert
Basket size: 500mm x 500mm
Maximum useable height 265mm
Cycle times: 90 / 120 / 150 seconds
Water consumption per cycle: 1.8 litres
Tank capacity: 15 litres
Electrical loading:2.6kW / 4.5kW / 6.5kW 230V~ or 6.5kW 400V 3N~ (special order)
600mm x 600mm x 710mm (720mm-730mm inc feet)
Two years parts and labour warranty

If 13A unit is ordered it will be supplied with original cable without a plug. Standard 13A plug is not suitable for the cable supplied. If using a 13A plug a replacement cable will be required on installation. Units on a 13amp supply will not be capable of running repeated cycles and the duration of the cycle will be automatically extended to allow the correct operating temperature. We strongly recommend using a blended hot supply (no higher than 55°C) in these circumstances

Easy to operate thanks to the fully electronic control with 3 program cycle times
Highly intuitive blue operating concept eliminates risk of operator errors
Convenient self-cleaning program ensures the wash space always stays clean
The deep-drawn, generously dimensioned wash chamber is intuitively designed and easy to clean, boasting integrated rack guides and rounded corners
AktivPlus wash water filter system keeps tank water cleaner for longer
Wash pump with soft start protects glassware and dishes
Built-in drain pump
Optimum value for money
Intuitive digital display
High-quality components including stainless steel wash arms
Efficient wash performance
Economical 20 litre wash tank with double-walled thermal insulation
Basket size: 500mm x 500mm
Output: up to 40 baskets per hour
Cycle times: 90 / 120 / 240 seconds
Passing height: 315mm
Water connection: 1 x 22mm 3/4" BSP
Water supply pressure: 1-5 bar
Minimum flow rate: 5lt / min
Final rinse consumption: 2.6 litres / cycle
Waste connection: 1 x 40mm standing waste
Electrical loading: 4.9kW 21A 230V~ or 6.9kW 400V 3N~
600mm x 600mm x 700mm
Two years parts and labour warranty

Commissioning and training by Meiko Engineer is included in the basic price (please note that unit must be installed by a competent engineer prior to commissioning)