 | 
DC Series DC 060IWS Front Loading Dishwasher with Intergal Softener
Internal water softener
180 second cycle time
450mm x 450mm basket size
290mm clearance height
Constructed of catering grade 18/8 AISI stainless steel
Tough electro-mechanical controls (no circuit boards)
Double skinned door and outer panels for additional strength and reduced noise levels
Powerful anti-clog wash arms and contra-rotating light weight rinse arms for optimum results
Integral peristaltic detergent and rinse aid pumps for precise dosing
1 plate rack, 1 cup rack
580W wash pump
2.5 litres consumption per cycle
Electrical loading: 4.08kW 20A 230V~ or 400V 3N~
535mm x 550mm x 812mm
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Price: £1,248.00 (Excluding VAT at 17.5%)
Normal Delivery 2-10 working days - direct
Supplier Reference : D1
|
|
|
 |
DC Series DC 070IWS Front Loading Dishwasher with Integral Softener
Internal water softener
180 second cycle time
500mm x 500mm basket size
315mm clearance height
Constructed of catering grade 18/8 AISI stainless steel
Tough electro-mechanical controls (no circuit boards)
Double skinned door and outer panels for additional strength and reduced noise levels
Powerful anti-clog wash arms and contra-rotating light weight rinse arms for optimum results
Integral peristaltic detergent and rinse aid pumps for precise dosing
1 plate rack, 1 cup rack & 1 cutlery rack
580W wash pump
2.5 litres consumption per cycle
Electrical loading: 4.08kW 20A 230V~ or 400V 3N~
580mm x 610mm x 840mm
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Price: £1,360.00 (Excluding VAT at 17.5%)
Normal Delivery 2-10 working days - direct
Supplier Reference : D1
|
|
|
 | 
Classeq Duo 750/WS Front Loading Dishwasher with integral water softener
Integral water softener
Rack size: 500mm x 500mm
Wash cycle 3 minutes
Wash chamber height 360mm
Up to 360 plates per hour
Double skinned insulation
WRC approved type A air break
Rinse booster pump
Detergent dispenser
Rinse aid dispenser
Drain pump
Auto clean down
Double skinned door
Removable rack guides
Removable door
Full width wash tank filter
One plate rack
One open rack
One cutlery rack
Electrical rating: 6.75kW 230V~ 30A
570mm x 630mm x 835mm (990mm deep with door open)
Two years parts and labour warranty
SPECIAL OFFER - SAVE £95
ENDS 30th September
(Normal price £1735.00 for Duo 750/WS)
Price: £1,640.00 (Excluding VAT at 17.5%)
Normal Delivery 2-3 working days - direct
Supplier Reference : C5
|
SS-500D Stainless Steel Stand (421mm high) (+£138.00) | 700DRP Additional Plate Basket
|
| 700GBP Additional Cup Basket
|
| CBP Additional Cutlery Basket
|
| DW2-5 Super clean glasswashing detergent 2 x 5 litres
|
| DWRA2-5 Super shine dishwashing rinse aid 2 x 5 litre
|
| 25kg Granulated Salt
|
| |
|
|
 | 
Comenda Linea LF324A Eco Front Loading Dishwasher with integral softener
100 / 150 second cycles
Up to 36 racks per hour
500mm square basket size
Supplied with 2 baskets
Separate stainless steel wash and rinse arms
Double insulated wall door with integrated handle
Opening height 345mm
Integral softener
Detergent & rinse aid injector
Drain pump
Self cleaning tank
Door micro switch
Hot or Cold feed (see below)
Electrical Loading :
3.2kW / 5.8kW / 8.5kW Single or Three Phase Supply
Runs on standard 13A supply with hot water feed only
600mm x 600mm x 820mm
One year parts and labour warranty
Price: £1,850.00 (Excluding VAT at 17.5%)
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
 | 
Hobart Bar Aid 800S Dishwasher with integral softener
Versatile and economical front loading dishwasher
Up to 40 racks per hour
Choice of 90 or 120 second wash / rinse programmes
Electronic controls - simple to use and easy to understand
Separate upper and lower wash and rinse arms - complete glass coverage ensuring perfect wash results
Two stage interlocked strainer - protects the wash system
Low volume 10.8 litre wash tank
Efficient 2.5 litre rinse tank provide efficient running costs
Automatic drain down and self flushing cycle - fast, efficient and promotes good hygiene standards
Multi phasing power loading - can be connected to varying electrical installation specifications
Built in water softener
Integral detergent and rinse aid pumps
Drain pump
Class 'AA' air gap
One plate rack, one open rack and one cutlery basket
Electrical loading:
5.6kW 25A 230V~ 50hz or 7.7kW 3 x 16A 400V 3N~ 50hz
600mm x 600mm x 830mm
One year parts and labour warranty
Price: £2,300.00 (Excluding VAT at 17.5%)
Normal Delivery 2-3 working days - direct
Supplier Reference : H4
|
P18-12 Additional Plate Rack
|
| BOO-07 Additional Cup Rack
|
| CB8 Additional Cutlery Basket
|
|
|
|
 |
Comenda FC4EA Professional Dishwasher with Integral softener
Electronic control panel with self diagnosys system
digital wash and rinse temperature display
60 / 100 / 150 / 480 second wash cycles
500mm x 500mm rack
integral water softener
400mm clearance
double skin construction
internal category 5 approved air gap
Rinse Control Device guarantees constant 85° C during entire rinse cycle and ensures compliance with WRAS backflow protection regulations
sanitising system
rinse booster pump
drain pump
detergent and rinse aid injectors
stainless steel filter on the whole tank surface with Dynamic filter
Hot or Cold feed (see below)
0.75kW wash pump
14 litre wash tank
7.5 litre booster tank
3.2 litre water consumption per cycle
Electrical Loading :
3.1kW / 5.4kW / 7.75kW Single or Three Phase Supply
Runs on standard 13A supply with hot water feed only
600mm x 610mm x 830mm
Two years parts and labour warranty
Price: £2,360.00 (Excluding VAT at 17.5%)
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
 | 
MEIKO ECO-530D + EW10 Front Loading Dishwasher with integral softener
Integral water softener
Up to 540 Dinner plates per hour
Basket size 500mm x 500mm
Passing height of 320mm
140 second programme cycle
Suitable for softened hot or cold fill (without integral softener option)
Detergent dosing pump with container
Rinse Aid pump with container
Drain pump for high level waste
Soft start on wash motor
Wash and rinse system from above and below
Hose and cable connection kit supplied
Touch sensitive controls (no switches)
1 phase or 3 phase can be selected at the time of machine installation
Rinse booster pump
Two finger type plate racks
One open type cup / bowl rack
Two eight compartment cutlery racks
Self cleaning cycle following drain down
Wash pump rating 0.55kW
Electrical Loading:
2.78kW 230/50/1 13A - HOT FILL ONLY
4.78kW 230/50/1
6.78kW 415/50/3 (Three Phase)
600mm x 600mm x 850mm
One year parts and labour warranty
Commissioning and training by Meiko Engineer is included in the basic price (please note that unit must be installed by a competent engineer prior to commissioning)
Price: £2,788.00 (Excluding VAT at 17.5%)
Normal Delivery 2-5 working days - direct
Supplier Reference : M2
|
|
|
 |
MEIKO FV40.2Aktiv Front Loading Dishwasher with Integral Water Softener
Integral water softener
720 Dinner plates per hour
Basket size 500mm x 500mm
Passing height of 420mm
90, 120 and 210 second programme cycles
Suitable for hot or cold fill
Detergent dosing pump with container
Rinse Aid pump with container
Drain pump for high level waste
Soft start on wash motor
Wash and rinse system from above and below
Hose and cable connection kit supplied
Touch sensitive controls (no switches)
1 phase or 3 phase can be selected at the time of machine installation
Rinse booster pump
Two finger type plate racks
One open type cup / bowl rack
Two eight compartment cutlery racks
Self cleaning cycle following drain down
Aqua-stop system for water leak detection
Aktiv Plus double filtration of fresh water
Perforated covers over wash tank
Wash pump rating 0.55kW
Electrical Loading:
2.8kW 230/50/1 13A - HOT FILL ONLY
4.8kW 230/50/1
6.8kW 415/50/3 (Three Phase)
600mm x 600mm x 850mm
One year parts and labour warranty
Commissioning and training by Meiko Engineer is included in the basic price (please note that unit must be installed by a competent engineer prior to commissioning)
Price: £4,505.00 (Excluding VAT at 17.5%)
Normal Delivery 2-5 working days - direct
Supplier Reference : M2
|
|
