 | 
Halcyon Amika 8XL Dishwasher
500mm x 500mm rack size
Simple controls for ease of use
Includes rinse aid dispenser
Supplied with one plate rack
Wash tank temperature 55°C
Rinse boiler temperature 85°C
Cycle time 90 / 150 seconds
Max usable height: 380mm
Tank capacity: 16 litres
Water consumption per cycle 3.2 litres
Electrical loading:
3.5kW 16A 230V~ (Hot feed only) or
6.2kW 26A 230V~ or
8.8kW 13A per phase 400V 3N~
710mm x 740mm x 1500mm
One year parts and labour warranty
Please note the drainage on this model is gravity fed, you will need a low level drain, or to position the unit on a stand so that the drain connection is below the bottom the tank. Alternatively select the optional drain pump below.
Please note that this model does not include a detergent injector, if you require this please select below
Price: £1,918.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : M9
|
|
|
 | 
DC Series DC 0100 Pass Through Dishwasher
180 second cycle time
500mm x 500mm basket size
365mm clearance height
Constructed of catering grade 18/8 stainless steel
Tough electro-mechanical controls (no circuit boards)
Double skinned hood and outer panels for additional strength and reduced noise levels
Powerful anti-clog wash arms and contra-rotating light weight rinse arms for optimum results
Integral peristaltic detergent and rinse aid pumps for precise dosing
Primary and secondary filter systems
1 plate rack, 1 cup rack & 1 cutlery rack
900W wash pump
Electrical loading: 6.9kW 30A 230V~ or 400V 3N~ 13A per phase
640mm x 730mm x 1440mm (1880mm open)
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Price: £2,014.00 (Excluding VAT at 20%)
Normal Delivery 2-5 working days - direct
Supplier Reference : D1
|
|
|
 |
Halcyon Amika 9XL BT Dishwasher
Integral breaktank (class "A" air gap)
500mm x 500mm rack size
Simple controls for ease of use
Includes rinse aid dispenser
Supplied with one plate rack
Wash tank temperature 55°C
Rinse boiler temperature 85°C
Cycle time 90 / 150 seconds
Max usable height: 380mm
Tank capacity: 16 litres
Water consumption per cycle 3.2 litres
Electrical loading:
3.5kW 16A 230V~ (Hot feed only) or
6.2kW 26A 230V~ or
8.8kW 13A per phase 400V 3N~
710mm x 740mm x 1500mm
One year parts and labour warranty
Please note the drainage on this model is gravity fed, you will need a low level drain, or to position the unit on a stand so that the drain connection is below the bottom the tank. Alternatively select the optional drain pump below.
Please note that this model does not include a detergent injector, if you require this please select below
Price: £2,110.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : M9
|
|
|
 | 
Classeq Hydro 857/DET Pass Through Dishwasher
Rack size 500mm x 500mm
90 and 180 second wash cycles
Wash chamber height 385mm
Capacity of up to 720 plates per hour
For pass through or corner operation
Softened hot feed recommended
Auto hood start
Rinse aid dispenser
Detergent dispenser
Drain pump
Full width wash tank filters
Continuous hood clean
One dish basket
One open basket
One cutlery basket
Electrical rating:
6.84kW 400V 3N~ 13A per phase or 6.84kW 230V~ 30A (select below)
630mm x 720mm x 1520mm (1940mm hood open)
One year parts and labour warranty
Price: £2,112.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : C5
|
| Select Electrical Configuration
|
|
WS20-SK 20 litre water softener (+£116.00) |
WSAUTO Automatic Cold Softener (+£448.00) |
WSHC10 Automatic Hot Softener (+£597.00) | 700PRP Hydro Plate Rack
|
| 700GBP Hydro Open Rack
|
| CBP Hydro Cutlery Basket
|
| DW2-5 Super clean dishwashing detergent 2 x 5 litres
|
| DWRA2-5 Super clean dishwashing rinse aid 2 x 5 litre
|
| 25kg Granulated Salt
|
| |
|
|
 | 
Fagor AD-90 BBT Pass Through Dishwasher (1210307416)
Production: 900 dishes per hour
Capacity for dishes: 420mm diameter
Wash cycles: 55ºC, 75ºC and 120ºC
Continuous washing position and stand by position
The hood rises easily with compensation system
Upper and lower rotating wash and rinse system
Heated by means of shielded elements
Tank with 4.5KW heating element
Tank capacity: 45 litres
Filters and trays in wash tank
Thermostatically adjusted
Wash temperature 60ºC and rinse temperature 90ºC
Thermo stop system
Self diagnostic system
Anti - return protection
Safety thermostat
Digital display for rinsing and washing temperature
Automatic wash and rinse dispensers
Boiler with stainless steel heating elements for the water of the rinse
Water consumption: 3 litres by rinse
Safety switch for hood opening
Electrical rating: 11.1KW 48.3 A 230V
675mm x 675mm x 1400mm
Supplied with:
1 x CT-10 base basket
1 x CT16/18 dish basket
2 x cutlery containers
Price: £2,170.00 (Excluding VAT at 20%)
Normal Delivery 5-10 working days - direct
Supplier Reference : F1
|
|
|
| |
Classeq Hydro 957/DET Pass Through Dishwasher
Rack size 500mm x 500mm
90 and 180 second wash cycles
Wash chamber height 385mm
Capacity of up to 720 plates per hour
For pass through or corner operation
Softened hot feed recommended
Auto hood start
Rinse aid dispenser
Detergent dispenser
Drain pump
Full width wash tank filters
Continuous hood clean
One dish basket
One open basket
One cutlery basket
Electrical rating: 9.48kW 400V 3N~ 17A per phase
630mm x 720mm x 1520mm (1940mm hood open)
One year parts and labour warranty
Price: £2,228.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : C5
|
|
|
 | 
Comenda PROhood 1 LC411M Pass Through Dishwasher
Multi Power
Manual control panel
Rinse control device guarantees 85°C rinse temperature
WRAS approved to category 3
Integral rinse booster pump
30 racks per hour
Rinse aid and detergent injectors
Hot or cold fill
Patented WRIS Stainless Steel integrated wash and rinse arms
Door micro switch
Manual self cleaning system
Clearance height: 440mm
Single skinned body
Basket size: 500mm x 500mm
Water consumption per cycle: 3.2 litres
120 / 180 second wash cycles
Electrical Loading :
3.1kW 230V~ 13.5A (Hot Fill)
3.75kW 230V~ 17A (Cold Fill)
5.45kW 230V~ 24A (Hot Fill)
6.75kW 230V~ 30A (Cold Fill)
7.75kW 230V~ 34A (Hot Fill)
9.75kW 230V~ 43A (Cold Fill)
7.75kW 400V 3N~ 12A per phase (Hot Fill)
9.75kW 400V 3N~ 15A per phase (Cold Fill)
632mm x 760mm x 1460mm
One year parts and labour warranty
Drain pump options available - select below
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
 | 
Hobart Ecomax CLH40 Pass Through Dishwasher (CLH40D-10)
Electro-mechanical pass through dishwasher
500mm x 500mm rack
Up to 40 cycles per hour
Facia mounted electro-mechanical push button controls
Suitable for straight through or corner operation
Choice of 90 second or 180 second cycles
0.8kW wash pump
Rinse pump
Drain pump
Detergent and rinse aid dosing equipment
Upper and lower rotating wash and rinse system
Thermostop rinse control
Double skin body, single skin hood
Class 'A' air gap
1 x Plate rack, 1 x open rack, 1 x 4 compartment cutlery basket
Electrical laoding: 6.8kW 230V~ 30A / 6.8kW 400V 3N~
635mm x 735mm x 1479mm (1909mm hood open)
One year parts and labour warranty
Image shows model with optional tabling - please contact us for further details
Price: £2,290.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : H4
|
|
|
 | 
Maidaid C1000 Pass Through Dishwasher
Simple electro-mechanical push button controls
Proven electronic time and temperature control
60 / 120 second cycles
Built in rinse aid dispenser
Surface tray filter - to prevent debris from contaminating wash water
Self draining wash pump - to reduce health risk from bacteria build up
Up to 1080 plates per hour
Ideal machine for high volume glasswashing
Superbly designed internal surfaces - simple to keep clean
Supplied with one plastic open and two plastic plate racks
Wash tank temperature - 55°C
Rinse tank temperature - 85°C
60 - 120 second cycle time
500mm x 500mm rack size
Usable height - 400mm
Electrical loading:
4.8kW 21A 230V~
6.8kW 30A 230V~
6.8kW 13A per phase 400V 3N~
720mm x 810mm x 1450mm
Two years parts and labour warranty
Price: £2,334.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : M9
|
|
|
 |
DC Series DC 1000 Pass Through Dishwasher
120 / 180 second cycle times
500mm x 500mm basket size
385mm clearance height
Constructed of catering grade 18/8 AISI stainless steel
Tough electro-mechanical controls (no circuit boards)
Powerful anti clog wash arms and contra-rotating light weight rinse arms for optimum results
Specially designed insulated low volume wash tank requires half as much water as conventional machines and therefore consumes less water, less power and less detergent for maximum savings
Double filter system with deep filter dish ensures full protection and reduced maintenance time
Counter balanced doubled skinned insulated hood and outer panels for additional strength and reduced noise levels
Integral peristaltic detergent and rinse aid pumps for precise dosing
Moulded self clean wash tank with easily removable basket support eliminates dirt traps and cuts maintenance time
Self draining wash pump
1 plate rack, 1 cup rack & 1 cutlery rack
900W wash pump
Electrical loading: 6.9kW 30A 230V~ or 400V 3N~ 13A per phase
650mm x 770mm x 1500mm (1960mm open)
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Price: £2,350.00 (Excluding VAT at 20%)
Normal Delivery 2-5 working days - direct
Supplier Reference : D1
|
|
|
| |
Classeq Hydro 957AS/DET Pass Through Dishwasher
Rack size 500mm x 500mm
90 and 180 second wash cycles
Wash chamber height 385mm
Capacity of up to 720 plates per hour
For pass through or corner operation
Softened hot feed recommended
Auto hood start
Rinse aid dispenser
Detergent dispenser
Drain pump
WRAS 'A' type air gap
Full width wash tank filters
Continuous hood clean
One dish basket
One open basket
One cutlery basket
Electrical rating: 12.84kW 400V 3N~ 22A per phase
630mm x 720mm x 1520mm (1940mm hood open)
One year parts and labour warranty
Price: £2,523.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : C5
|
|
|
 | 
Sammic SL-1100 DD Pass Through Dishwasher (1301043)
Wash all types of plates, trays, glassware, cups, cutlery, etc.
For straight or corner situations according to the tables position
Combined wash and rinse arms both top and bottom
Tank and boiler temperature display
3 washing cycles with automatic cycle start
Troubleshooting indicator lights
Thermo stop option included: guarantees a minimum rinsing temperature of 85ºC
Constructed from AISI-304 2B austenitic stainless steel with the highest quality components
Removable stainless steel rack holders
Automatic rinse aid dosing equipment
Detergent dosing equipment
Watertight controls
Stainless steel top tank filter set
Adjustable thermostats in tank and boiler and safety thermostat in boiler
Basket dimensions 500mm x 500mm
Supplied with 1 open basket, 1 plate basket & 1 cutlery basket
Maximum plate height 400mm
60 / 120 / 180 second cycles
880W wash pump
2.5kW wask wash tank element
6kW rinse tank element
Electrical loading: 6.88kW 230V 50Hz
640mm x 756mm x 1920mm (open)
One year parts and labour warranty
Price: £2,606.00 (Excluding VAT at 20%)
Normal Delivery 2-5 working days - direct
Supplier Reference : S3
|
|
|
 |
DC Series DC 1300 Pass Through Dishwasher
60 / 120 / 180 second cycle times
500mm x 500mm basket size
385mm clearance height
Constructed of catering grade 18/8 AISI stainless steel
Tough electro-mechanical controls (no circuit boards)
Powerful anti clog wash arms and contra-rotating light weight rinse arms for optimum results
Specially designed insulated low volume wash tank requires half as much water as conventional machines and therefore consumes less water, less power and less detergent for maximum savings
Double filter system with deep filter dish ensures full protection and reduced maintenance time
Counter balanced doubled skinned insulated hood and outer panels for additional strength and reduced noise levels
Integral peristaltic detergent and rinse aid pumps for precise dosing
Moulded self clean wash tank with easily removable basket support eliminates dirt traps and cuts maintenance time
Self draining wash pump
1 plate rack, 1 cup rack & 1 cutlery rack
1135W wash pump
Electrical loading: 7.135kW 30A 230V~ or 400V 3N~ 14A per phase
650mm x 770mm x 1500mm (1960mm open)
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Price: £2,611.00 (Excluding VAT at 20%)
Normal Delivery 2-5 working days - direct
Supplier Reference : D1
|
|
|
 |
Hobart Ecomax CHH50 Pass Through Dishwasher (CHH50D-10)
Electronic Pass Through Dishwasher
500mm x 500mm rack
Up to 60 cycles per hour
Hood mounted electronic control system with digital temperature display, cycle counter and diagnostic system
Suitable for straight through or corner operation
Choice of 60 second, 90 second or 180 second cycles
0.8kW wash pump
Rinse pump
Drain pump
Detergent and rinse aid dosing equipment
Upper and lower rotating wash and rinse system
Stand by energy saving feature
Thermostop rinse control
Double skin body, single skin hood
Class 'A' air gap
1 x Plate rack, 1 x open rack, 1 x 4 compartment cutlery basket
Electrical laoding: 6.8kW 230V~ 30A / 6.8kW 400V 3N~
635mm x 735mm x 1529mm (1969mm hood open)
One year parts and labour warranty
Image shows model with optional tabling - please contact us for further details
Price: £2,750.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : H4
|
|
|
 | 
Blue Seal SH55E BT Pass Through Dishwasher
Twin wash cycle and integral break tank
Rack size 500 x 500mm
Racks output 30 racks per hour
Rinse aid dispenser
Detergent pump
Drain pump
Wash cycle 120 seconds
Water consumption per cycle 3.5 litres
Tank capacity 48 litres
Boiler capacity 8.2 litres
Boiler heating element 6000w
Tank heating element 3000w
Wash pump 750w
Total loading 6750w
Outlet pipe 35mm
Inlet hose 3.4" G (2-4Bar) flow pressure
Electrical rating: 6.75kW 32A 230V~ or 9.75kW 400V 3N~
710mm x 735mm x 1450mm (1860mm open)
One year parts and labour warranty
Price: £2,757.00 (Excluding VAT at 20%)
Normal Delivery 2-4 working days - direct
Supplier Reference : B2
|
Select Electrical Configuration
|
| Wing Table
|
|
|
|
 |
Comenda PROhood 5 LC700M Pass Through Dishwasher
Single or 3 Phase Power
Manual control panel
Rinse control device guarantees 85°C rinse temperature
WRAS approved to category 5
Integral rinse booster pump
40 racks per hour
Rinse aid and detergent injectors
Hot or cold fill
Stainless steel wash and rinse arms
Stainless steel micro filtration system
Door micro switch
Manual self cleaning system
Clearance height: 440mm
Single skinned body
Basket size: 500mm x 500mm
Water consumption per cycle: 4 litres
90 / 120 / 180 / 480 second wash cycles
Electrical Loading :
6.75kW 30A 230V~ or
400V 3N~ 10A per phase (Hot feed)
10.0kW 44A 230V~ or
400V 3N~ 15A per phase (Cold feed)
625mm x 760mm x 1460mm
One year parts and labour warranty
Single or three phase, and drain pump options available - select below
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
| |
DC Series DC 1350A Pass Through Dishwasher with break tank
60 / 120 / 180 second cycle times
500mm x 500mm basket size
385mm clearance height
Constructed of catering grade 18/8 AISI stainless steel
Tough electro-mechanical controls (no circuit boards)
Powerful anti clog wash arms and contra-rotating light weight rinse arms for optimum results
Specially designed insulated low volume wash tank requires half as much water as conventional machines and therefore consumes less water, less power and less detergent for maximum savings
Double filter system with deep filter dish ensures full protection and reduced maintenance time
Additional wash pump protection filter
Counter balanced doubled skinned insulated hood and outer panels for additional strength and reduced noise levels
Integral peristaltic detergent and rinse aid pumps for precise dosing
Moulded self clean wash tank with easily removable basket support eliminates dirt traps and cuts maintenance time
Self draining wash pump
Break tank with rinse booster pump
1 plate rack, 1 cup rack & 1 cutlery rack
1200W wash pump
Electrical loading: 11.2kW 400V 3N~
650mm x 770mm x 1500mm (1960mm open)
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Price: £2,934.00 (Excluding VAT at 20%)
Normal Delivery 2-5 working days - direct
Supplier Reference : D1
|
|
|
 |
Comenda PROhood 2 LC900M Pass Through Dishwasher
Single or 3 Phase Power
Manual control panel
Rinse control device guarantees 85°C rinse temperature
WRAS approved to category 5
Integral rinse booster pump
48 racks per hour
Rinse aid and detergent injectors
Hot or cold fill
Stainless steel wash and rinse arms
Stainless steel micro filtration system
Door micro switch
Manual self cleaning system
Clearance height: 440mm
Single skinned body
Basket size: 500mm x 500mm
Water consumption per cycle: 3.5 litres
75 / 120 / 180 second wash cycles
Electrical Loading :
9.1kW 40A 230V~ or
400V 3N~ 14A per phase (Hot feed)
12.2kW 54A 230V~ or
400V 3N~ 18A per phase (Cold feed)
625mm x 760mm x 1460mm
One year parts and labour warranty
Single or three phase, and drain pump options available - select below
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
 |
Maidaid D2020 Pass Through Dishwasher
Supplied with fitted type 'A' air gap break tank
Constant rinse performance (CRP)
Precise and reliable electronic controls with soft touch operation
Digital boiler and wash tank temperature displays
3 cycle times plus continuous option
Built in rinse aid dispenser
Surface tray filter - to prevent debris from contaminating wash water
Self draining wash pump - to reduce health risk from bacteria build up
Up to 1080 plates per hour
Low water capacity wash tank - energy saving
Superbly designed internal surfaces - simple to keep clean
Supplied with one plastic open and two plastic plate racks
Wash tank temperature - 55°C
Rinse tank temperature - 85°C
WRAS approved
500mm x 500mm baskets
400mm usable height
60 / 110 / 150 and continuous cycle times
Electrical loading:
6.5kW 28A 230V~
9.1kW 13A per phase 400V 3N~
710mm x 810mm x 1530mm
Two years parts and labour warranty
Image shows model with optional tabling
Price: £3,201.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : M9
|
|
|
 |
Blue Seal SH120E Pass Through Dishwasher
Class "A" air gap fully WRAS approved
Rack size 500 x 500mm
Racks output 55 / 36 / 24 per hour
Rinse aid dispenser
Detergent pump
Drain pump
Wash cycles 65, 100 & 150 seconds
Water consumption per cycle 3.5 litres
Tank capacity 42 litres
Boiler capacity 8.2 litres
Boiler heating element 6000w / 9000w (Three Phase)
Tank heating element 4000w
Wash pump 1100w
Total loading 7100w 10100w (Three Phase)
Outlet pipe 35mm
Inlet hose 3.4" G (2-4Bar) flow pressure
Electrical rating: 7.1kW 32A 230V~ or 10.1kW 400V 3N~
710mm x 740mm x 1450mm (1860mm open)
One year parts and labour warranty
Price: £3,325.00 (Excluding VAT at 20%)
Normal Delivery 2-4 working days - direct
Supplier Reference : B2
|
Select Electrical Configuration
|
| Wing Table
|
|
|
|
 |
Hobart Ecomax CHH70 Pass Through Dishwasher (CHH70D-10)
Electronic Pass Through Dishwasher
500mm x 500mm rack
Up to 70 cycles per hour
Hood mounted electronic control system with digital temperature display, cycle counter and diagnostic system
Suitable for straight through or corner operation
Choice of 55 second, 110 second or 150 second cycles
1.1kW wash pump
Rinse pump
Drain pump
Detergent and rinse aid dosing equipment
Upper and lower rotating wash and rinse system
Stand by energy saving feature
Thermostop rinse control
Double skin body with fully insulated hood
Class 'A' air gap
1 x Plate rack, 1 x open rack, 1 x 4 compartment cutlery basket
Electrical laoding: 10.3kW 400V 3N~
635mm x 735mm x 1529mm (1969mm hood open)
One year parts and labour warranty
Image shows model with optional tabling - please contact us for further details
Price: £3,185.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : H4
|
|
|
| |
Sammic SL-1200 DD Pass Through Dishwasher (1301062)
Wash all types of plates, trays, glassware, cups, cutlery, etc.
For straight or corner situations according to the tables position
Combined wash and rinse arms both top and bottom
Tank and boiler temperature display
3 washing cycles with automatic cycle start
Troubleshooting indicator lights
Thermo stop option included: guarantees a minimum rinsing temperature of 85ºC
Constructed from AISI-304 2B austenitic stainless steel with the highest quality components
Removable stainless steel rack holders
Automatic rinse aid dosing equipment
Detergent dosing equipment
Watertight controls
Stainless steel top tank filter set
Adjustable thermostats in tank and boiler and safety thermostat in boiler
Basket dimensions 500mm x 500mm
Supplied with 1 open basket, 1 plate basket & 1 cutlery basket
Maximum plate height 400mm
60 / 120 / 180 second cycles
1.5kW wash pump
3kW wask wash tank element
9kW rinse tank element
Electrical loading: 10.5kW 400V 50Hz 3N~
640mm x 756mm x 1920mm (open)
One year parts and labour warranty
Price: £3,249.00 (Excluding VAT at 20%)
Normal Delivery 2-5 working days - direct
Supplier Reference : S3
|
|
|
 |
Comenda PROhood 6 LC1200 Pass Through Dishwasher
Single or 3 Phase Power
Manual control panel
Rinse control device guarantees 85°C rinse temperature
WRAS approved to category 5
Integral rinse booster pump
65 racks per hour
Rinse aid and detergent injectors
Hot or cold fill
Stainless steel wash and rinse arms
Stainless steel micro filtration system
Door micro switch
Manual self cleaning system
Clearance height: 440mm
Single skinned body
Basket size: 500mm x 500mm
Water consumption per cycle: 4 litres
55 / 85 / 120 second wash cycles
Electrical Loading :
10.5kW 46A 230V~ or
400V 3N~ 16A per phase (Hot feed)
15.5kW 68A 230V~ or
400V 3N~ 23A per phase (Cold feed)
625mm x 760mm x 1460mm
One year parts and labour warranty
Single or three phase, and drain pump options available - select below
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
 |
Maidaid MH2040 Pass Through Dishwasher
Constructed with heavy gauge stainless steel - built to last
Soft touch controls
Twin digital temperature displays
Proven electric controls
Fitted breaktank included
Double skinned insulated hood for reduced noise and heat retention
Powerful wash pump to shift down stubborn deposits
Moulded wash tank enables easy cleaning
Surface tray filters - to prevent debris from contaminating wash water
Self draining wash pump - to reduce health risk from bacteria build up
3 adjustable cycle times 60 - 300 seconds
Built in rinse aid dispenser
Thermostop system on all models to ensure rinse temperatures for good results
WRAS approved
Supplied with one cup and one plate rack
Wash tank temperature - 55°C
Rinse tank temperature - 85°C
Up to 1080 plates per hour
500mm x 500mm racks supplied
400mm usable height
Electrical loading: 7.5KW 30A 230V~
720mm x 730mm x 1410mm
Two year parts and labour warranty
Price: £3,549.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : M9
|
|
|
 |
Comenda PROhood 3 C800E Pass Through Dishwasher
Multi Power
Electronic control panel
Rinse control device guarantees 85°C rinse temperature
WRAS approved to category 3
Integral rinse booster pump
48 racks per hour
Rinse aid and detergent injectors
Hot or cold fill
Patented WRIS Stainless Steel integrated wash and rinse arms
Stainless steel micro filtration system
Door micro switch
Auto self cleaning system
Auto fault dianosis
Clearance height: 440mm
Double skinned body
Basket size: 500mm x 500mm
Water consumption per cycle: 3.2 litres
Drain pump
75 / 120 / 180 / 480 second wash cycles
Electrical Loading :
3.2kW 230V~ 14A (Hot Fill)
3.75kW 230V~ 17A (Cold Fill)
5.8kW 230V~ 26A (Hot Fill)
6.75kW 230V~ 30A (Cold Fill)
8.75kW 230V~ 39A (Hot Fill)
9.75kW 230V~ 43A (Cold Fill)
8.75kW 400V 3N~ 13A per phase (Hot Fill)
9.75kW 400V 3N~ 15A per phase (Cold Fill)
625mm x 740mm x 1460mm
Two years parts and labour warranty
Price: £3,580.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
 |
Maidaid Evolution 1010 Pass Through Dishwasher
Designed to minimise energy usage
Low water consumption
Simple soft touch control, digital temperature display
Selectable energy saving option
Selectable quick start
Selectable thermostop for guarenteed rinse temperature
Built in break tank
Superior peristaltic dosing for detergent and rinse aid
Surface tray filter
Three programmable cycle times
Full moulded wash tank
500mm x 500mm rack size
400mm usable height
60 - 120 - 180 cycle times
Electrical loading:
4.8kW 16A 230V~
6.8kW 26A 230V~
6.8kW 13A per phase 400V 3N~
710mm x 800mm x 1590mm
Two years parts and labour warranty
Image shows model with optional tabling
Price: £3,580.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : M9
|
|
|
 |
Comenda PROhood 7 C1000E Pass Through Dishwasher
Single or 3 Phase Power
Electronic control panel
Rinse control device guarantees 85°C rinse temperature
WRAS approved to category 5
Integral rinse booster pump
72 racks per hour
Rinse aid and detergent injectors
Hot or cold fill
Stainless steel wash and rinse arms
Stainless steel micro filtration system
Door micro switch
Auto self cleaning system
Auto fault dianosis
Clearance height: 440mm
Double skinned body
Basket size: 500mm x 500mm
Water consumption per cycle: 3.5 litres
50 / 90 / 120 / 480 second wash cycles
Electrical Loading :
10.1kW 44A 230V~ or
400V 3N~ 15A per phase (Hot feed)
15.1kW 66A 230V~ or
400V 3N~ 22A per phase (Cold feed)
625mm x 760mm x 1460mm
Two years parts and labour warranty
Single or three phase, and drain pump options available - select below
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
| |
Maidaid MH2050 Pass Through Dishwasher
Constructed with heavy gauge stainless steel - built to last
Soft touch controls
Twin digital temperature displays
Proven electric controls
Fitted breaktank included
Double skinned insulated hood for reduced noise and heat retention
Powerful wash pump to shift down stubborn deposits
Moulded wash tank enables easy cleaning
Surface tray filters - to prevent debris from contaminating wash water
Self draining wash pump - to reduce health risk from bacteria build up
3 adjustable cycle times 50 - 300 seconds
Built in rinse aid dispenser
Thermostop system on all models to ensure rinse temperatures for good results
WRAS approved
Supplied with one cup and one plate rack
Wash tank temperature - 55°C
Rinse tank temperature - 85°C
Up to 1080 plates per hour
500mm x 500mm racks supplied
400mm usable height
Electrical loading: 10.5kW 16A per phase 400V 3N~
720mm x 730mm x 1410mm
Two year parts and labour warranty
Price: £3,795.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : M9
|
|
|
 | 
MEIKO ECO545D Pass Through Hood Dishwasher (ECO-06)
Up to 720 Dinner plates per hour
Basket size 500mm x 500mm
Passing height of 440mm
90,120 and 240 second programmes
Internal basket guides adjustable on site for corner or straight operation
Suitable for softened hot or cold fill (without integral softener option)
Detergent and rinse aid dosing pump incorporated
Soft start feature on wash pump motor
Wash and rinse system top and bottom
Hose and cable connection kit included
Touch sensitive controls (no switches)
Hot or cold connection can be selected at time of installation
1 phase or 3 phase connection can be selected at time of installation
Class 'A' air gap with rinse booster pump
Two finger type plate racks
One open type cup / bowl rack
Two eight compartment cutlery racks
Self cleaning cycle following drain down
Wash pump rating 0.73kW
Electrical Rating:
5.78kW 230/50/1
8.28kW 415/50/3 (Three phase)
635mm x 750mm x 1470mm (1965mm)
One year parts and labour warranty
Commissioning and training by Meiko Engineer is included in the basic price (please note that unit must be installed by a competent engineer prior to commissioning)
Price: £3,993.00 (Excluding VAT at 20%)
Normal Delivery 2-5 working days - direct
Supplier Reference : M2
|
|
|
 |
Comenda PROhood 4 C1300E Pass Through Dishwasher
Single or 3 Phase Power
Electronic control panel
Rinse control device guarantees 85°C rinse temperature
WRAS approved to category 5
Integral rinse booster pump
72 racks per hour
Rinse aid and detergent injectors
Hot or cold fill
Stainless steel wash and rinse arms
Stainless steel micro filtration system
Door micro switch
Auto self cleaning system
Auto fault dianosis
Clearance height: 440mm
Double skinned body
Basket size: 500mm x 500mm
Water consumption per cycle: 3.5 litres
50 / 90 / 120 / 480 second wash cycles
Electrical Loading :
11.5kW 50A 230V~ or
400V 3N~ 17A per phase (Hot feed)
15.5kW 68A 230V~ or
400V 3N~ 23A per phase (Cold feed)
625mm x 760mm x 1460mm
Two years parts and labour warranty
Single or three phase, and drain pump options available - select below
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
| |
Maidaid Evolution 2020 Pass Through Dishwasher
Designed to minimise energy usage
Low water consumption
Simple soft touch control, digital temperature display
Automatic self cleaning cycle at drain down
Selectable energy saving option
Selectable quick start
Selectable thermostop for guaranteed rinse temperature
Built in break tank
Superior peristaltic dosing for for rinse aid
Surface tray filter
Three programmable cycle times
Full moulded wash tank
500mm x 500mm rack size
400mm usable height
60 - 120 - 180 cycle times
Electrical loading:
6.4kW 30A 230V~
9.1kW 9.1A per phase 400V 3N~
710mm x 800mm x 1590mm
Two years parts and labour warranty
Image shows model with optional tabling
Price: £4,053.00 (Excluding VAT at 20%)
Normal Delivery 2-3 working days - direct
Supplier Reference : M9
|
|
|
 |
Comenda PROpot 1 XLC Multi-Purpose Dish and Pot Washer
Single or 3 Phase Power
Electronic control panel
Rinse control device guarantees 85°C rinse temperature
WRAS approved to category 5
Integral rinse booster pump
60 racks per hour
Rinse aid and detergent injectors
Hot or cold fill
Stainless steel wash and rinse arms
Stainless steel micro filtration system
Door micro switch
Auto self cleaning system
Auto fault dianosis
Clearance height: 550mm
Double skinned body
MRS double wash pump
Basket size: 500mm x 600mm
Water consumption per cycle: 4 litres
60 / 120 / 180 / 180+MPS second wash cycles
Electrical Loading :
11.5kW 50A 230V~ or
400V 3N~ 17A per phase (Hot feed)
16.5kW 72A 230V~ or
400V 3N~ 24A per phase (Cold feed)
725mm x 760mm x 1560mm
Two years parts and labour warranty
Single or three phase, and drain pump options available - select below
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
 |
MEIKO DV80.2 Pass Through Hood Dishwasher (DV-01)
Up to 1080 Dinner plates per hour
Basket size 500mm x 500mm
Passing height of 440mm
60,90 and 210 second programmes
Internal basket guides adjustable on site for corner or straight operation
Suitable for softened hot or cold fill
Detergent and rinse aid dosing pump incorporated
Soft start feature on wash pump motor
Wash and rinse system top and bottom
Hose and cable connection kit included
Touch sensitive controls (no switches)
Hot or cold connection can be selected at time of installation
1 phase or 3 phase connection can be selected at time of installation
Class 'A' air gap with rinse booster pump
Two finger type plate racks
One open type cup / bowl rack
Two eight compartment cutlery racks
Self cleaning cycle following drain down
Wash pump rating 0.73kW
Aqua stop system for water leak detection
Aktiv Plus double filtration of wash water
Perforated covers over wash tank
Integral drain pump for high level waste
Electrical Rating:
5.8kW 230/50/1
8.3kW 415/50/3 (Three phase)
635mm x 750mm x 1470mm (1965mm)
One year parts and labour warranty
Commissioning and training by Meiko Engineer is included in the basic price (please note that unit must be installed by a competent engineer prior to commissioning)
Price: £5,002.00 (Excluding VAT at 20%)
Normal Delivery 2-5 working days - direct
Supplier Reference : M2
|
|
|
 |
MEIKO DV120.2 Pass Through Hood Dish and Utensil Washer (DV-03)
Dual Dish and Utensil Washer
Up to 1080 Dinner plates per hour
Basket size 500mm x 500mm
Passing height of 440mm
60,90 and 210 second programmes
Internal basket guides adjustable on site for corner or straight operation
Suitable for softened hot or cold fill
Detergent and rinse aid dosing pump incorporated
Soft start feature on wash pump motor
Wash and rinse system top and bottom
Hose and cable connection kit included
Touch sensitive controls (no switches)
Hot or cold connection can be selected at time of installation
Class 'A' air gap with rinse booster pump
Two finger type plate racks
One open type cup / bowl rack
Two universal utensil washing racks
Two eight compartment cutlery racks
Self cleaning cycle following drain down
Wash pump rating 1.1kW
Aqua stop system for water leak detection
Aktiv Plus double filtration of wash water
Perforated covers over wash tank
Integral drain pump for high level waste
Electrical Rating:
10.4kW 415/50/3 (Three phase) - HOT FILL
11.9kW 415/50/3 (Three phase) - COLD FILL
635mm x 750mm x 1470mm (1965mm)
One year parts and labour warranty
Commissioning and training by Meiko Engineer is included in the basic price (please note that unit must be installed by a competent engineer prior to commissioning)
Price: £5,393.00 (Excluding VAT at 20%)
Normal Delivery - Please call us on 01476 593062
Supplier Reference : M2
|
|
