Potato Peelers

Abrasive peeling - the abrasive is highly resistant and long lasting
Integral control panel complete with on/off push buttons
Aluminium body
PPC model includes attachment drive to power accessories
Capacity: 5 - 6kg
Output: 120 - 150kg per hour
Electircal loading for standard unit: 400W 240/1/50 or 370W 400/3/50
Electircal loading with accessory attachment drive: 550W 240/1/50 or 550W 400/3/50
395mm x 700mm x 433mm (without stand)
411mm x 700mm x 945mm (with optional stand)
One year parts and labour warranty

(Images shows model with optional stand and filter)

Ideal for small spaces
Abrasive peeling - the abrasive is highly resistant and long lasting
Base plate lined with highly resistant and long lasting abrasive
Stainless steel body
Integral control panel complete with on/off push buttons
Capacity: 5kg
Output: 80 - 100kg per hour
Timer: 0 - 6 minutes
Electrical loading: 300W 2A 230V~
333mm x 367mm x 490mm (without stand)
425mm x 555mm x 965mm (with optional stand)
One year parts and labour warranty

(Image shows model with optional stand and filter)

3.5kg capacity
35kg per hour
170mm discharge height
Easy to use with on / off switch and mechanical timer
Requires level table or sink top for installation
No volt release to prevent automatic restart if power is cut
Safety interlock to prevent operation when cylinder is removed
Motor protection IP55
WRAS approved Class AA air break
Quick and easy to clean
Designed for easy maintenance
Hygienic, robust cast aluminium and stainless steel construction
Rust-proof peeling plate and liners
Space saving, multi-functional, compact design
Quiet operation
Energy efficient
Motor Power 0.18kW
Electrical Loading: 0.18kW 10A 230V~ or 0.18kW 5A 400V~ - specify as required
380mm x 650mm x 425mm
Two years parts and labour warranty

Abrasive peeling - the abrasive is highly resistant and long lasting
Integral control panel complete with on/off push buttons
Aluminium body
PPC model includes attachment drive to power accessories
Capacity: 10-11kg
Output: 220 / 270kg per hour
Timer: 0 - 6 minutes
Electircal loading for standard unit: 400W 240/1/50 or 370W 400/3/50
Electircal loading with accessory attachment drive: 550W 240/1/50 or 550W 400/3/50
395mm x 700mm x 503mm (without stand)
411mm x 700mm x 1015mm (with optional stand)
One year parts and labour warranty

(Images shows model with optional stand and filter)

Constructed from food grade, non-corrosive aluminium alloy castings, with the spindle housing and chute cast integrally, liminating joints and possible leakage
Sinktop, pedestal or trolley mounted
Complies with all relevant safety standards, and are designed for ease of maintenance and cleaning
Spindle housing and chute cast integrally, eliminating joints and possible leakage
No lubrication is required - all bearings are grease packed and permanently sealed
V-belt driven for noiseless transmission, with provision for belt tensioning if required
Rotor plate coated on both sides, doubling its life - fine grained abrasive for new potatoes on one side and coarse grained for old potatoes on the other
Peeling chamber with cast in abrasive serrations, this dispenses the need for an abrasive coating
Patented guarded discharge chute - the guard protects the operator by allowing the door to the chamber to be opened which simultaneously stops hand access through the door aperture whilst the machine is working available as option below
Capacity: 4.5kg / 10lb
Height of peeling chamber: 320mm
Discharge outlet: 38mm
Water inlet: hose union with nozzle and provision for fitting on either side
Water outlet: tapped 1 1/2" BSP ready for pipe to be connected (provision for fitting on either side)
Motor: 1/3hp
Electrical loading: 13A 230V~
354mm x 576mm x 370mm
One year parts and labour warranty

7kg capacity
50kg per hour
170mm discharge height
Easy to use with on / off switch and mechanical timer
Requires level table or sink top for installation
No volt release to prevent automatic restart if power is cut
Safety interlock to prevent operation when cylinder is removed
Motor protection IP55
WRAS approved Class AA air break
Quick and easy to clean
Designed for easy maintenance
Hygienic, robust cast aluminium and stainless steel construction
Rust-proof peeling plate and liners
Space saving, multi-functional, compact design
Quiet operation
Energy efficient
Motor / Power 0.18kW
Electrical Loading: 0.18kW 10A 230V~ or 0.18kW 5A 400V~ - Specify as required
380mm x 650mm x 500mm
Two years parts and labour warranty

Constructed from food grade, non-corrosive aluminium alloy castings, with the spindle housing and chute cast integrally, liminating joints and possible leakage
Sinktop, pedestal or trolley mounted
Complies with all relevant safety standards, and are designed for ease of maintenance and cleaning
Spindle housing and chute cast integrally, eliminating joints and possible leakage
No lubrication is required - all bearings are grease packed and permanently sealed
V-belt driven for noiseless transmission, with provision for belt tensioning if required
Rotor plate coated on both sides, doubling its life - fine grained abrasive for new potatoes on one side and coarse grained for old potatoes on the other
Peeling chamber with cast in abrasive serrations, this dispenses the need for an abrasive coating
Patented guarded discharge chute - the guard protects the operator by allowing the door to the chamber to be opened which simultaneously stops hand access through the door aperture whilst the machine is working available as option below
Capacity: 6.8kg / 15lb
Height of peeling chamber: 390mm
Discharge outlet: 38mm
Water inlet: hose union with nozzle and provision for fitting on either side
Water outlet: tapped 1 1/2" BSP ready for pipe to be connected (provision for fitting on either side)
Motor: 1/3hp
Electrical loading: 13A 230V~
354mm x 576mm x 446mm
One year parts and labour warranty

Flexible hose or plumbed in
Waste outlet on either side
Thickly gritted non-rusting cast aluminium peeler plate
Carborundum non-rusting stainless steel reversible cylinder liners
Motor and water inlet designed to run quietly
Hygienic brushed stainless steel finish
Water & waste drain from the cylinder base aided by large cast paddles under the peeler plate
Up to 120kg of potatoes peeled per hour
Class 'A' air break with brass fan nozzle
12kg (28lb) capacity
300kg per hour
0.37kW motor
220/240-1-50 15A or 400-3-50 5A
530mm x 624mm x 1120mm
Two years parts and labour warranty

Low pedestal model:
Discharge height: 650mm
Dimensions: 530mm x 624mm x 1120mm

High pedestal model:
Discharge height: 950mm
Dimensions: 530mm x 624mm x 1400mm

Powerful direct gear drive motors
Standard height or sink height models available
Designed to enable the user to operate, clean and maintain with the minimum of effort
Motor and gearbox units are housed inside the pedestal therefore no external projections
The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded
Rotor plate bonded with abrasive grit
Supplied with a wall mounted starter which incorporate the on switch, emergency stop, no-volt release and overload protection features - fitted with 13amp plug
Waste outlet is screwed 2" BSP female
Capacity: 4lb / 6.3kg
1/3 HP motor
476mm x 491mm x 975mm (standard) or 1204mm (high pedestal)
One year parts and labour warranty

28lb (12.6kg capacity)
Constructed with rust proofed steel pedestals and cast aluminium bases, spindle housings, peeling chambers and tops
Castings made from a non-corrosive, malleable and ductile aluminium alloy
Gear driven
Top of the peeling chamber lifts off so that the rotor plate can be removed with the two lifting hooks for easy cleaning
Rotor plate bonded with abrasive grit
Inside of peeling chamber with cast in serrations
Finished in high gloss catalysed enamel in silver grey hammer
Top of machine in polished aluminium casting
Supplied with a suitable water inlet and hose connection incorporating an air break
Waste outlet is screwed 2" BSP female
1/2 HP motor
482mm x 480mm x 930mm (standard) or 1245mm (high pedestal)
One year parts and labour warranty

Flexible hose or plumbed in
Waste outlet on either side
Thickly gritted non-rusting cast aluminium peeler plate
Carborundum non-rusting stainless steel reversible cylinder liners
Motor and water inlet designed to run quietly
Hygienic brushed stainless steel finish
Water & waste drain from the cylinder base aided by large cast paddles under the peeler plate
Up to 250kg of potatoes peeled per hour
Class 'A' air break with brass fan nozzle
25kg (56lb) capacity
300kg per hour
0.75kW motor
220/240-1-50 15A or 400-3-50 5A
Two years parts and labour warranty

Low pedestal model:
Discharge height: 650mm
Dimensions: 564mm x 725mm x 1080mm

High pedestal model:
Discharge height: 930mm
Dimensions: 564mm x 725mm x 1360mm

The extremely efficient and robust 56SS Peeler is designed for regular high volume use and enables up to 300kgs of potatoes to be prepared every hour. It is available in a choice of pedestal heights and with the option of an integrated filter basket.

Easy to load and operate
Featuring a large hopper opening with a robust lip, and simple to use wall mounted controls.
The control unit prevents automatic restart in the event of the power being cut
The motor and water inlet both run exceptionally quietly
The 2hp motor ensures that performance and reliability are maximised
Quick and simple cleaning
Hygienic brushed stainless steel finish
Water and waste drain away efficiently from the smooth cylinder base of the machines with the help of large paddles under the peeler plate, which are easy to remove and clean
Cast aluminium peeler plate, stainless steel chute and hopper, and tough door mechanism combine to offer a long maintenance-free service life
Motor: 2hp 230V~ or 400V 3N~
Low pedestall: 564mm x 725mm x 1080mm
High pedestall: 564mm x 725mm x 1360mm
One year parts and labour warranty