Special Offer Dishwashers and Glasswashers

The M-iClean H commercial dishwasher is the ultimate benchmark for user-friendly, ergonomic operation, cleanlines and efficiency: shorter cycle times, faster drying and lower staff costs

Up 80% reduction in humidity with Climate version
Up to 21% lower energy consumption
Hood opens and closes itself with just a gentle tap from the operator. Silent. Reliable. Effortless
Automatic basket detection
Versatile display at eye height & signal concept
Optional waste water heat recovery
60 month warranty on all electrical and mechanical components of the automatic hood system

Ergonomics Comfort - automatic basket detection, easy drying with option drying table (please contact us for more information)
Much more pleasant working enviroment
Fewer staff absences due to back / shoulder pain
Potential to make significant savings

Pure Energy - Efficient heat retention and optional waste water heat recovery
Energy savings up to 21%
Lower running costs
Pays for itself in 1.8 years

Feel Good Climate - Optional steam extraction unit with heat recovery and self-cleaning feature
Up to 80% lower steam emissions
Noticeably better indoor air quality
Energy savings of up to 18%

Miraculous Shine - Optional built-in GiO reverse osmosis module
Superb washing performance
Saves valuable time; eliminates need for manual polishing and gets tableware back in use quicker
Glasses and dishes cool down faster
Less breakage

Technical information:
Basket size: 500mm x 500mm
Output: up to 60 baskets per hour (up to 40 with heat recovery)
Cycle options: 60 / 90/ 210 seconds
Passing height: 505mm
1-5 bar required water pressure / 5 litres minimum flow rate
Tank capacity: 22 litres
Final rinse consumption: 2.4 litres
Wash pump: 0.75kW
Electrical loading: 9.1kW 400V 3N~
635mm x 750mm x 1520mm (2080mm with hood open)
Two years parts and labour warranty

Please note height increases to 2100mm with Energy model and 2180mm with Climate model

Please note to validate the warranty this machine will need to be connected to a suitably softened water supply

Image shows model with tabling, not included in price. Please contact us for more information

*** Special offer price on standard HM model, was £11,493.00, now £9440.00, save £2053.00 ***

AktivClean built in water softener model
Fully electronic MIKE 1 control with wireless infrared technology
Double walled hood and body
Choice of three programs
Original MEIKO eco filter system
Soft start of wash pumps prevents possible breakages
Self-cleaning cycle when tank is drained
Integral drain and booster pumps
Digital wash and rinse temperature displays
Upper and lower wash and rinse arms
Hose and cable connection kit
Standard basket starter pack included
Basket size: 500mm x 500mm
Output: 40 racks per hour
Cycle times: 90 / 150 / 210 seconds
Passing height: 440mm
Water connection: 1 x 22mm 3/4" BSP
Water supply pressure: 1-5 bar
Minimum flow rate 5lt / min
Final rinse consumption: 2.6lt per cycle
Waste connection: 1 x 40mm standing waste
Wash pump: 0.75kW
Electrical loading: 8.6kW 400V 3N~ (hot fill)
635mm x 750mm x 1470mm (2050mm hood open)
Two years parts and labour warranty

Commissioning and training by Meiko Engineer is included in the basic price (please note that unit must be installed by a competent engineer prior to commissioning)

The M-iClean dish washer offers a full range of innovative technology, intuitive operation and efficient warewashing with minimal use of resources and reliable status checks including smart monitoring technology
The blue-lit touch display screen is made from hygienic safety glass with a high resolution program progress indicator
Operators can select easily their choice program using the display icons on the screen
The colour coded illuminated handle allows the user to see the machines status from across the room
Meiko's blue operating concept makes cleaning crystal clear. With an illuminated interior the staff can easily access and clean all components marked in blue
Combined stainless steel wash and rinse arms simplify cleaning and operation
Bluetooth easy data transfer available makes it easy to transmit service data
Automatic self cleaning
Internal reservoir for detergent and rinse aid - optional dosing system available below
Integrated Gio reverse osmosis unit
Theoretical rack capacity: 40 racks per hour
Programme cycle time: 90 / 120 / 240 seconds
Basket size: 500mm x 500mm
Entry height: 315mm
Electrical loading: 4.7kW 22.7A 230V~
600mm x 615mm x 820mm
Two years parts and labour warranty

Optional MIC-AC integrated heat recovery system available below to capture some of the steam generate in the washing process and use it to re-heat the tank for the next wash saving on average 15% on electrical running costs

AktivClean built in water softener model
Easy to operate thanks to the fully electronic control with 3 program cycle times
Highly intuitive blue operating concept eliminates risk of operator errors
Convenient self-cleaning program ensures the wash space always stays clean
The deep-drawn, generously dimensioned wash chamber is intuitively designed and easy to clean, boasting integrated rack guides and rounded corners
AktivPlus wash water filter system keeps tank water cleaner for longer
Wash pump with soft start protects glassware and dishes
Built-in drain pump
Optimum value for money
Intuitive digital display
High-quality components including stainless steel wash arms
Efficient wash performance
Economical 20 litre wash tank with double-walled thermal insulation
Basket size: 500mm x 500mm
Output: up to 40 baskets per hour
Cycle times: 90 / 120 / 240 seconds
Passing height: 420mm
Water connection: 1 x 22mm 3/4" BSP
Water supply pressure: 1-5 bar
Minimum flow rate: 5lt / min
Final rinse consumption: 2.6 litres / cycle
Waste connection: 1 x 40mm standing waste
Electrical loading: 4.9kW 21A 230V~ or 6.9kW 400V 3N~
600mm x 665mm x 820mm
Two Two and a half years parts and labour warranty

Maximum incoming water temperature: 50°C

Commissioning and training by Meiko Engineer is included in the basic price (please note that unit must be installed by a competent engineer prior to commissioning)