Truly amazing! See a stone counter-top magically become a heated buffet table.
The CookTek® Incogneeto induction buffet warmer is designed to be installed directly underneath any natural stone or engineered stone counter-top 3/4 - 1 1/4 (20-30mm thick).
No holes, no cutting, and no drilling required. The unit is mounted on a rail system, which is attached to plywood (strips or substrate, depending on stone thickness) affixed to the underside of the counter-top.
The key to the system is the patent pending Magneeto 2. This trivet-like device is used on the upper surface of the counter-top to locate the induction heat zone. A flashing red LED indicates proper placement. Dish temperature is
taken and communicated to the unit below. The Magneeto 2 also acts as a key, so that even if left on no heating will occur without it in place.
The unit offers a number of temperature selections from a range of 85-190°F / 30-88°C. Any suitably sized induction compatible dish (of suitable diameter) can be used on top of the Magneeto 2. Use beautiful enamel cast ironware or traditional chafing dishes to create the right ambiance for your guests buffet dining experience.
The counter-top itself is not heated as long as it contains no significant amounts of magnetic material. CookTek® approves use of the system with all natural and engineered stone counter tops when installed in accordance to its best practices guide.
Supplied with RFID control including 480mm mounting track and one Magneeto 2 RFID Locator / Controller Disc
Under counter-top design, aluminum housing, heavy duty energy efficient electronics, and polycarbonate top
Easy installation square ring (supplied) mounts to underside of counter-top and unit snaps into ring
Units require CookTek Magneeto 2 trivet (patent pending) - included with each unit - and standard induction compatible serving dishes. Magneeto 2 acts as a temperature sensor, communicator, and locator device which allows heating of induction compatible dishes through stone counter-top
Units compatible with all natural and engineered stones, 30mm (1¼) thick with no substrate, or 20mm (3/4) thick with 20mm (3/4) or 12mm (1/2) plywood substrate
Temperature selected via control panel, or Magneeto 2 can be programmed via keypad to preset a temperature for automatic control
Automatic pan detection allows for instant energy transmission to pan, and almost no energy consumption when pan is not present
Maximum temperature limit prevents damage to servingware, keeps food in the safe zone
Standard Cat 5e or Cat 6 patch cable from unit to control box is included. Replacement cables up to 25ft (7.6m) long may be used but MUST BE SHIELDED
Lock feature prevents unwanted setting changes
Red LED display for precise user feedback and control
Unit Dimensions: 445mm x 445mm x 114mm
Electrical loading: 0.65kW 2.7A 230V~
Five year return to base warranty on unit
One year return to base warranty on Magneeto 2
Please note that the minimum base size for any container when placed in the Magneeto 2 is 145mm, any containers must be induction compatible such as the MCS 'Dolphin' range