Epoxy, Nylon, Plastic and Polymer Shelving Racks

4 tier shelving bay, comprising 4 posts and 4 shelves
With the same innovative design of the ECLIPSE range, ECLIPSE Perma Plus has the added benefit of a hard baked epoxy resin coating to prevent corrosion and an antibacterial additive, making it perfect for use in all hygiene sensitive areas
Up to 5 times longer lasting than nylon coated shelving
Fights bacteria for up to 10 years
60% less expensive than stainless steel and aluminium
Recommended for walk in cold rooms, hospitals and all hygiene sensitive areas
Ideal for use in coldrooms and freezers; temperature range from 28oC to +100oC.
Ideal for cold rooms, freezers and wet areas
Quick and easy to assemble
Coated shelves AND posts for complete protection
Fully adjustable shelf heights every 25mm
Innovative design - reduce costs and improve access by using add-on units
Available in 81 size combinations
300kg UDL per shelf up to 1200mm length
240kg UDL per shelf over 1200mm length

Outer wire structure - 5.8mm thick
Cross support wires - 4.3mm thick
Main shelf wires - 3.3mm thick
Standard height units are 1625mm high
One year manufacturer defects warranty

Corrosion resistance and antibacterial properties are reliant on the integrity of the epoxy coating. Impact or use of caustic substances may compromise the integrity of the coating

Grey nylon coated wire shelves
Bright chrome 25mm diameter poles grooved at 25mm incremends
Adjustable non-marking plastic feet fitted as standard
Plastic tapered assembly collars
For use in drystores, coldstores, freezer rooms, chemical areas, kitchen / potwash areas
Temperature tollerant between -40 and +110°C
Weight loading (based on even load and correct installation):
600-1200mm wide = 300kg per shelf
1500-1800mm wide = 275kg per shelf
Three tier unit height: 1650mm
Four tier unit height: 1800mm

4 tier shelving bay, comprising 4 posts and 4 shelves
ECLIPSE Plastic Plus shelving makes use of strong box section electroplated steel with a protective coating to give frames tough enough to hold up to 360kg per shelf, with antibacterial coated removable plastic shelves for extra hygiene
Temperature resistant from -29oC to 88oC
Fully adjustable - shelf heights every 25mm
Strong & robust - up to 360kg shelf load capacity*
Mix and match - Removable solid or vented shelf panels
Dishwasher friendly
Adjustable post feet for uneven floors
Composite castors and extra-strength posts convert to units to mobile
Quick and easy to assemble - bolt-free, no specialist tools required
360kg UDL per shelf up to 1220mm length
280kg UDL per shelf over 1220mm length
Complies with MoD Specification 42 - alternative to stainless steel
Standard height units are 1625mm high

Image shows unit with both vented and solid shelves

Modules either:
Four fier shelving bay, comprising 2 side frames and 4 shelves, 1700mm high
or
Four tier add on module, comprising 1 side frames and 4 shelves, 1700mm high
Designed for use in damp or corrosive environments, combining anodised aluminium frames and shelf supports with removable, easy to clean plastic shelf slats
Load bearing parts are manufactured with high strength anodised aluminium, with plastic components molded to high resistance using basic acids and bacteria proof raw materials, easily removable and dishwasher proof
Corrosion resistant for use in cold-rooms and chillers
High density solution - store more in smaller spaces
Easy to clean - ideal for use in hygiene sensitive areas
Temperature resistance range is 30ºC to 90ºC
Load capacities from 110kg to 250kg per shelf
NSF, NF, Tuv Nord GS and HACCP accredited system
Easy to expand using Add-On units
Standard height units are 1730mm high

Select either full unit or add on module where creating an extended run or corner

Additional shelves, frames and corner supports available as optional accessories

Please contact us for assistance to help design your shelving configuration

Additional sizes of this system are available on a lead time of approximately 12-15 working days, please contact us for more details.

The combination of aluminium and polymer makes the Norm 12 shelving unit the ideal solution for storing vegetables, meat or dairy products. This shelving system can also be used for cold storage down to -30°C. Its high-quality finish and easy-cleaning properties meet the most stringent hygiene requirements. These are also surely the reasons why the Norm 12 shelving unit is so highly prized in commercial kitchens, hospitals, residential homes, restaurants and hotels.

Suitable for dry stores, cold rooms and freezer rooms
Uniformly distributed load of:
Up to 150kg per shelf (1000mm -1200mm modules)
Up to 100kg per shelf (1400mm - 1500mm modules)
Solid or louvred polymer shelves
Maximum permissible load permanently in the temperature range from -30°C to +70°C possible
Dimension of gap with the louvred shelf 75 x 25 mm
Supporting beams made from aluminium special profile
Shelves removable and dishwasher safe
Anodised aluminium uprights - easy to clean
Shelves easily adjusted in seconds - no tools required
Units are 1800mm high with widths selectable below


For sizes, pricing and availability on this product range please contact us on 01476 593062

Extra depth shelves - maximises capacity
50% increase in capacity against 600mm deep units
Grey nylon coated wire shelves
Bright chrome 25mm diameter poles grooved at 25mm incremends
Adjustable non-marking plastic feet fitted as standard
Plastic tapered assembly collars
For use in drystores, coldstores, freezer rooms, chemical areas, kitchen / potwash areas
Temperature tollerant between -40 and +110°C
Three tier unit height: 1650mm
Four tier unit height: 1800mm
All units are 900mm deep