 | 
Classeq ECO 3 Front Loading Glasswasher
Rack size: 500mm x 500mm (25 pint glasses)
Wash cycle 2 minutes
Wash chamber height 360mm
Up to 750 glasses per hour
Suitable for softened hot or cold fill
Detergent dispenser
Rinse aid dispenser
Double skinned door
Removable rack guides
Removable door
Full width wash tank filter
Two glass baskets
Electrical rating: 6.75kW 230V~ 32A or
400V 3N~ 16A per phase
This unit can be downrated to run on a 230V~ 13A or 20A supply, however the recovery time bewteen cycles will increase and the maximum throughput will decrease.
550mm x 630mm x 825mm (990mm deep with door open)
One year parts and labour warranty
This model is supplied as standard with a drain pump at no additional cost, a gravity drain model is also available at for the same price if you require - please select below
SPECIAL OFFER - SAVE £297
ENDS 31st July
(Normal price £1461.00 for standard unit)
Price: £1,164.00 (Excluding VAT at 15%)
Normal Delivery 2-3 working days - direct
Supplier Reference : C5
|
|
WS16-SK 16 litre water softener (+£83.00) |
SS-500 Stainless Steel Stand (410mm high) (+£133.00) | 700GBP Additional Glass Basket
|
| GW2-5 Super clean glasswashing detergent 2 x 5 litres
|
| GWRA2-5 Super shine glasswashing rinse aid 2 x 5 litre
|
| 25kg Granulated Salt
|
| |
|
|
 | 
DC Series DC 050 Glasswasher
120 second cycle time
500mm x 500mm basket size
270mm clearance height
Constructed of catering grade 18/8 AISI stainless steel
Tough electro-mechanical controls (no circuit boards)
Double skinned door and outer panels for additional strength and reduced noise levels
Powerful anti-clog wash arms and contra-rotating light weight rinse arms for optimum results
Integral peristaltic detergent and rinse aid pumps for precise dosing
2 racks supplied
580W wash pump
2.5 litres consumption per cycle
Electrical loading: 4.08kW 20A 230V~ or 400V 3N~
580mm x 610mm x 715mm
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Where a drain pump is not added as an optional extra, and a stand is not used the maximum height for the drain connection is 200mm
Price: £1,214.00 (Excluding VAT at 15%)
Normal Delivery 2-5 working days - direct
Supplier Reference : D1
*** DC Series Special Offer ***
Save 4% on all advertised prices on DC Series catering equipment (discount will be automatically calculated at the checkout).
Click here to see the products included |
|
|
 |
Classeq DUO 3 Dront Loading Glasswasher
Rack size: 500mm x 500mm (25 pint glasses)
Wash cycle 2 minutes
Wash chamber height 360mm
Up to 750 glasses per hour
Suitable for softened hot or cold fill
WRAS approved type A air gap
Rinse booster pump
Drain pump
Auto clean down system
Double skinned insulation
Detergent dispenser
Rinse aid dispenser
Removable rack guides
Removable door
Full width wash tank filter
Two glass baskets
Electrical rating: 6.75kW 230V~ 32A or
400V 3N~ 16A per phase
This unit can be downrated to run on a 230V~ 13A or 20A supply, however the recovery time bewteen cycles will increase and the maximum throughput will decrease.
570mm x 630mm x 835mm (990mm deep with door open)
One year parts and labour warranty
SPECIAL OFFER - SAVE £328
ENDS 31st July
(Normal price £1605.00 for standard unit)
Price: £1,277.00 (Excluding VAT at 15%)
Normal Delivery 2-3 working days - direct
Supplier Reference : C5
|
|
|
 |
DC Series DC 050M Glasswasher
120 second cycle time
500mm x 500mm basket size
315mm clearance height
Top and bottom wash arms
Constructed of catering grade 18/8 AISI stainless steel
Tough electro-mechanical controls (no circuit boards)
Double skinned door and outer panels for additional strength and reduced noise levels
Powerful anti-clog wash arms and contra-rotating light weight rinse arms for optimum results
Integral peristaltic detergent and rinse aid pumps for precise dosing
2 racks supplied
580W wash pump
2.5 litres consumption per cycle
Electrical loading: 4.08kW 20A 230V~ or 400V 3N~
610mm x 580mm x 840mm
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Where a drain pump is not added as an optional extra, and a stand is not used the maximum height for the drain connection is 200mm
Price: £1,357.00 (Excluding VAT at 15%)
Normal Delivery 2-5 working days - direct
Supplier Reference : D1
*** DC Series Special Offer ***
Save 4% on all advertised prices on DC Series catering equipment (discount will be automatically calculated at the checkout).
Click here to see the products included |
|
|
 |
DC Series DC 50 Premium Glasswasher
120 second cycle times
500mm x 500mm basket size
345mm clearance height
Constructed of catering grade 18/8 AISI stainless steel
Tough electro-mechanical controls (no circuit boards)
Double skinned door and outer panels for additional strength and reduced noise levels
Powerful anti-clog wash arms and contra-rotating light weight rinse arms for optimum results
Moulded wash tank with integral basket slides to eliminate dirt traps
Specially designed insulated low volume wash tank requires up to half as much water as conventional machines and therefore consumes less water, less power and less detergent for maximum savings
Double filter system ensures full protection and reduced maintenance time
Integral peristaltic detergent and rinse aid pumps for precise dosing
2 glass baskets
580W wash pump
2.5 litres consumption per cycle
Electrical loading: 5.08kW 25A 230V~ or 400V 3N~
600mm x 605mm x 845mm
One year parts and labour warranty
A water softener is required where water hardness exceeds 7° Clark (100PPM)
Where a drain pump is not added as an optional extra, and a stand is not used the maximum height for the drain connection is 80mm
Price: £1,684.00 (Excluding VAT at 15%)
Normal Delivery 2-5 working days - direct
Supplier Reference : D1
*** DC Series Special Offer ***
Save 4% on all advertised prices on DC Series catering equipment (discount will be automatically calculated at the checkout).
Click here to see the products included |
|
|
 | 
Hobart Bar Aid 500S Glasswasher with integral softener
High capacity 500mm basket glasswasher designed to deliver up to 1500 sparkling clean glasses per hour
Choice of 90 or 120 second wash / rinse programmes
Electronic controls - simple to use and easy to understand
Separate upper and lower wash and rinse arms - complete glass coverage ensuring perfect wash results
Interlocked strainer - protects the wash system
Low volume 10.8 litre wash tank
Efficient 2.5 litre rinse tank provide efficient running costs
Automatic drain down and self flushing cycle - fast, efficient and promotes good hygiene standards
Multi phasing power loading - can be connected to varying electrical installation specifications
Built in water softener
Integral detergent and rinse aid pumps
Drain pump
Class 'AA' air gap
One open rack & one 4 division rack
Electrical loading:
5.6kW 25A 230V~ 50hz or 7.7kW 30x 16A 400V 3N~ 50hz
600mm x 600mm x 830mm
One year parts and labour warranty
SPECIAL OFFER - SAVE £165
ENDS 28th August 2009
(Normal price £2054.00 for standard unit)
Price: £1,889.00 (Excluding VAT at 15%)
Normal Delivery 2-3 working days - direct
Supplier Reference : H4
|
|
|
 | 
Comenda FC3E Professional Glasswasher
Electronic control panel with self diagnosys system
digital wash and rinse temperature display
60 / 100 / 150 / 480 second wash cycles
500mm x 500mm rack
300mm clearance
double skin construction
internal category 5 approved air gap
Rinse Control Device guarantees constant 85° C during entire rinse cycle and ensures compliance with WRAS backflow protection regulations
sanitising system
rinse booster pump
drain pump
detergent and rinse aid injectors
stainless steel filter on the whole tank surface with Dynamic filter
Hot or Cold feed (see below)
0.75kW wash pump
14 litre wash tank
7.5 litre booster tank
3.2 litre water consumption per cycle
Electrical Loading :
3.1kW / 5.4kW / 7.75kW Single or Three Phase Supply
Runs on standard 13A supply with hot water feed only
600mm x 610mm x 720mm
Price: £1,850.00 (Excluding VAT at 15%)
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
| |
Comenda FC3EA Professional Glasswasher with Integral softener
Electronic control panel with self diagnosys system
digital wash and rinse temperature display
60 / 100 / 150 / 480 second wash cycles
500mm x 500mm rack
integral water softener
300mm clearance
double skin construction
internal category 5 approved air gap
Rinse Control Device guarantees constant 85° C during entire rinse cycle and ensures compliance with WRAS backflow protection regulations
sanitising system
rinse booster pump
drain pump
detergent and rinse aid injectors
stainless steel filter on the whole tank surface with Dynamic filter
Hot or Cold feed (see below)
0.75kW wash pump
14 litre wash tank
7.5 litre booster tank
3.2 litre water consumption per cycle
Electrical Loading :
3.1kW / 5.4kW / 7.75kW Single or Three Phase Supply
Runs on standard 13A supply with hot water feed only
600mm x 610mm x 720mm
Two years parts and labour warranty
Price: £2,109.00 (Excluding VAT at 15%)
Normal Delivery 2-3 working days - direct
Supplier Reference : D2
|
|
|
 | 
MEIKO ECO-530G Glasswasher
60-120 second programme cycle
Suitable for softened hot or cold fill
Passing height of 320mm
Up to 1500 glasses per hour
Basket size 500mm x 500mm
Detergent and rinse aid dosing pumps with container
Drain pump for high level waste outlet
Soft start feature on wash pump motor
Rotating wash system from above and below
Rinse system from above and below
Hose and cable connection kit supplied
Touch sensitive controls - no switches
Class 'A' air gap with rinse booster pump
Two open pattern racks
Self cleaning cycle following drain down
Wash pump rating 0.55kW
Electrical Loading:
2.55kW 230/50/1 13A - HOT FILL ONLY
4.55kW 230/50/1
6.55kW 415/50/3 (Three Phase)
600mm x 600mm x 850mm
One year parts and labour warranty
Price: £2,509.00 (Excluding VAT at 15%)
Normal Delivery 2-5 working days - direct
Supplier Reference : M2
|
|
|
| |
MEIKO ECO-530G + EW10 Glasswasher with integral softener
Integral water softener
90 second programme cycle
Suitable for softened hot or cold fill
Passing height of 320mm
Up to 1500 glasses per hour
Basket size 500mm x 500mm
Detergent and rinse aid dosing pumps with container
Drain pump for high level waste outlet
Soft start feature on wash pump motor
Rotating wash system from above and below
Rinse system from above and below
Hose and cable connection kit supplied
Touch sensitive controls - no switches
Rinse booster pump
Two open pattern racks
Self cleaning cycle following drain down
Wash pump rating 0.55kW
Electrical Loading:
2.55kW 230/50/1 13A - HOT FILL ONLY
4.55kW 230/50/1
6.55kW 415/50/3 (Three Phase)
600mm x 600mm x 850mm
One year parts and labour warranty
Price: £3,084.00 (Excluding VAT at 15%)
Normal Delivery 2-5 working days - direct
Supplier Reference : M2
|
|
|
 |
MEIKO FV40.2 Glasswasher
Basket size 500mm x 500mm
Passing height of 420mm
90, 120 and 210 second programme cycles
Suitable for softened hot or cold fill
Detergent dosing pump with container
Rinse Aid pump with container
Drain pump for high level waste
Soft start on wash motor
Wash and rinse system from above and below
Hose and cable connection kit supplied
Touch sensitive controls (no switches)
1 phase or 3 phase can be selected at the time of machine installation
Class 'A' air gap with rinse booster pump
Two open pattern racks
Self cleaning cycle following drain down
Aqua-stop system for water leak detection
Aktiv Plus double filtration of fresh water
Perforated covers over wash tank
Wash pump rating 0.55kW
Electrical Loading:
2.6kW 230/50/1 13A - HOT FILL ONLY
4.6kW 230/50/1
6.6kW 415/50/3 (Three Phase)
600mm x 600mm x 850mm
One year parts and labour warranty
Price: £4,003.00 (Excluding VAT at 15%)
Normal Delivery 2-5 working days - direct
Supplier Reference : M2
|
|
|
 |
MEIKO FV40.2Aktiv Glasswasher with Integral Water Softener
With Integral water softener
Basket size 500mm x 500mm
Passing height of 420mm
90, 120 and 210 second programme cycles
Suitable for hot or cold fill
Detergent dosing pump with container
Rinse Aid pump with container
Drain pump for high level waste
Soft start on wash motor
Wash and rinse system from above and below
Hose and cable connection kit supplied
Touch sensitive controls (no switches)
1 phase or 3 phase can be selected at the time of machine installation
Class 'A' air gap with rinse booster pump
Two open pattern racks
Self cleaning cycle following drain down
Aqua-stop system for water leak detection
Aktiv Plus double filtration of fresh water
Perforated covers over wash tank
Wash pump rating 0.55kW
Electrical Loading:
2.8kW 230/50/1 13A - HOT FILL ONLY
4.8kW 230/50/1
6.8kW 415/50/3 (Three Phase)
600mm x 600mm x 850mm
One year parts and labour warranty
Price: £4,505.00 (Excluding VAT at 15%)
Normal Delivery 2-5 working days - direct
Supplier Reference : M2
|
|
